In recent years, new national transportation safety regulations have been progressively tightened; the mandatory standardization of active safety features on commercial vehicles and the safety-compliant retrofitting of existing vehicles have become mandatory requirements across the industry.
Henan Huhang Group (www.hu-hang.com) is a domestic technology enterprise specializing in active vehicle safety equipment, intelligent collision avoidance systems, and automatic emergency braking applications. Focusing on the field of vehicle safety supporting solutions, the company's self-developed safety systems are highly tailored to the complex road conditions and transportation operational scenarios prevalent in China. These systems address challenges in vehicle safety management across multiple dimensions—including intelligent proactive risk avoidance, blind-spot safety protection, driver behavior management, digitalized smart supervision, and policy compliance implementation—thereby effectively assisting transportation and manufacturing enterprises in achieving comprehensive vehicle safety management, reducing risks, lowering costs, and enhancing overall efficiency.
I. Intelligent proactive risk avoidance: comprehensive mitigation of road driving risks
Prior to the installation of intelligent safety equipment, the driving safety of cooperative transportation fleets relied entirely on drivers' experience and on-the-spot response; in complex scenarios—such as sudden lane changes at high speeds, unregulated crossings by non-motorized vehicles in urban areas, or low visibility conditions caused by rain, fog, or adverse lighting—the risk of safety hazards became particularly acute when drivers were fatigued or negligent. Since the mass deployment of the Henan Huhang AEBS (Automatic Emergency Braking System) collision avoidance system across these fleets, the overall driving safety level has been significantly enhanced. This system incorporates a high-precision 3D LiDAR developed in-house by Huhang Group and integrates multi-sensor fusion perception technology, offering long detection ranges, high recognition accuracy, and strong anti-interference capabilities. It enables continuous, 24/7 stable operation regardless of severe weather conditions—including heavy rain, dense fog, adverse lighting, darkness at night, or complex rural road conditions—while accurately identifying pedestrians, non-motorized vehicles, motor vehicles, as well as various static and dynamic obstacles, thereby comprehensively covering all high-risk driving scenarios encountered during daily operations.
This system features a scientific dual protection logic comprising hierarchical early warning and hierarchical braking mechanisms, balancing safety with driving comfort. When the system detects a collision risk ahead, it prioritizes activating an audible and visual warning to remind the driver to take timely action and proactively avoid the hazard; if the driver is negligent and fails to respond promptly, the system will intervene rapidly at millisecond-level precision—based on the remaining risk distance and vehicle speed—to achieve a smooth deceleration or emergency stop, thereby avoiding the issues associated with the abrupt braking characteristic of traditional equipment that can disrupt normal driving operations. Additionally, Henan Huhang's self-developed three core actuation components—the linear actuated proportional valve, oil valve, and motor—can seamlessly integrate with various types of fleet vehicles, including those equipped with air brakes, hydraulic systems, or new energy propulsion systems. These components offer excellent compatibility, stable operation, and an extremely low false-trigger rate, effectively reinforcing the fundamental safety baseline without interfering with the driver's normal operational rhythm, ensuring exceptional adaptability.
II. Addressing vehicle visibility shortcomings to resolve blind spot and operational safety challenges
To address the prominent issues faced by cooperative transportation enterprises—such as large vehicles (e.g., construction waste trucks, concrete mixing trucks, and heavy-duty freight trucks) experiencing "significant blind spots, high risks during right turns, and a high probability of accidents when reversing at terminals" —the fleet has simultaneously installed the Henan Huhang BSD Blind Spot Monitoring Braking System and the Intelligent Reverse Collision Avoidance System. The Blind Spot Monitoring System can monitor pedestrians, electric bicycles, and other road users within the vehicle's right-side and rear visual blind zones around the clock; it provides early warnings and emergency braking intervention during lane changes, right-turning, or low-speed travel, thereby preventing high-frequency fatal or injurious accidents caused by blind spots during right turns of large vehicles and significantly enhancing the safety of urban road transportation. The Intelligent Reverse Collision Avoidance System is specifically designed for operational scenarios characterized by dense personnel and obstructed visibility—such as construction sites, industrial parks, logistics hubs, and enclosed terminals—by accurately identifying rear obstacles and operating personnel, effectively avoiding low-speed reverse scraping or collision accidents, and providing comprehensive, all-scenario safety protection throughout both driving and operational phases.
III. Standardizing driving behavior to control human-induced safety hazards at their source
Based on years of fleet management experience, the vast majority of safety incidents involving commercial vehicles stem from human factors such as driver fatigue, distraction, and non-compliant driving practices. Traditional management approaches adopted by cooperative transportation enterprises—relying on manual inspections and post-incident penalties—suffer from drawbacks such as delayed supervision, incomplete coverage, and weak enforcement mechanisms, making it impossible to curb risks at their source. By implementing the Henan Huhang DMS Driver Behavior Monitoring System, fleets have achieved a fully closed-loop management system capable of providing preemptive early warnings, real-time interventions during driving, and post-event traceability for driver behavior. Leveraging high-precision visual sensing monitoring technology, the system can identify violations in real time—including fatigued driving, eye-sleeping, making phone calls while driving, being distracted by handheld devices, failing to wear a seatbelt, and operating without a valid license—while simultaneously delivering real-time voice alerts to correct these unsafe driving habits. This approach effectively reduces human-induced safety hazards at the source, comprehensively standardizes driving behavior within the fleet, and enhances overall driving safety awareness.
IV. Digitalized intelligent management and control: significantly reduces fleet management costs
In the realm of fleet digital management, Henan Huhang's cloud-based intelligent safety management platform has completely transformed the traditional, extensive management model employed by partner transportation enterprises—characterized by manual ledger entries and post-event statistical analysis. Previously, fleet vehicle data was fragmented, risks could not be predicted, and potential hazards could not be traced; consequently, safety management efforts were time-consuming, labor-intensive, and yielded suboptimal results. Currently, the platform can real-time aggregate core data points—including the driving trajectories of all fleet vehicles, safety alert records, emergency braking and hazard avoidance events, driver violation data, and equipment operating status. Enterprise managers can monitor the overall operational safety status of the entire fleet from anywhere at any time via computers or mobile terminals, accurately pinpoint high-frequency risk vehicles and key violators, enable early identification of potential hazards, facilitate precise root-cause analysis of issues, and ensure the detailed implementation of safety responsibilities. This approach significantly reduces manual management costs and substantially enhances the level of precision and digitalization in fleet safety management.
V. Ensuring compliant and efficient implementation to achieve a dual enhancement of both safety and efficiency
Regarding industry compliance, all models of Huhang's active safety equipment fully comply with both national and Ministry of Transport technical standards for active safety equipment, are compatible with all categories of commercial vehicles, feature lightweight design without requiring structural modifications to the original vehicle, allow for easy installation, and can rapidly assist transportation enterprises in completing compliance upgrades for their existing fleet as well as annual inspection and filing procedures, thereby mitigating policy-related risks. Based on long-term operational data analysis and comparative studies, since the mass deployment of the Huhang active safety system, partner fleets have seen significant reductions in traffic accident rates, vehicle maintenance costs, cargo loss rates, and insurance claims expenses, effectively realizing multiple operational benefits—including comprehensive safety assurance, full compliance with regulatory requirements, and reduction of costs while increasing revenue.
VI. High-quality service guarantees and long-term stability to support fleet operations
The core competitive advantages of Henan Huhang lie not only in its fully self-developed collision-avoidance hardware technology and sensor recognition capabilities tailored to domestic road conditions—compliant with both domestic industry standards and EU standards—but also in its comprehensive approach. Since establishing its partnership, Henan Huhang has provided cooperative transportation enterprises with one-on-one, end-to-end dedicated services, spanning from the initial customization of vehicle compatibility solutions, bulk on-site installation and commissioning, and hands-on team training, to subsequent remote fault diagnosis and after-sales maintenance; throughout this entire process, the company delivers efficient responses and professional service, effectively addressing the key pain points associated with the implementation, operation, and upgrade of safety equipment, thereby ensuring the long-term stable operation of such equipment.
For transportation enterprises, safety constitutes the fundamental baseline for their survival and development, as well as the core competitive advantage for the long-term operation of fleets. The large-scale deployment of Huhang's comprehensive range of active safety equipment in Henan has not only enabled partner transportation enterprises to successfully complete their industry compliance rectification tasks but has also comprehensively addressed existing gaps in fleet safety management and strengthened the safety production defense line. Moving forward, Huhang Group will continue to iterate and upgrade its intelligent safety equipment and digital management systems, steadily enhancing the safety production capabilities of fleets and supporting the transportation industry in advancing toward a more standardized, safer, and more efficient future.
Henan Huhang Automotive Technology Group Co., Ltd.
With over a decade of dedicated expertise in vehicle active safety technologies
AEB Automatic Emergency Braking | ADAS Intelligent Warning System | Comprehensive Collision Avoidance for Industrial and Mining Special Vehicles
Complete professional vehicle safety protection solutions, safeguarding driving safety across all environments.
Automotive OEM supply solutions, aftermarket retrofit services, and business consulting packages
Official Website: www.hu-hang.com
Consultation Hotline: 0371-86556688
Business WeChat: 18569912153
